-=-=-=-=-=- -PIPEBOMBS- -=-=-=-=-=- :MATERIALS: ============= -> 8 Inch Section Of PVC Conduit. 1" In Diameter. -> 2 Pipe Caps. (That Will Fit The PVC) -> Some Sort Of Propellant. -> Water-Proof Fuse. -> Tube Of Forma-Gasket, Or Some Other Sealant. -> Hot Glue Gun. -> Power Drill. -> Small Drill Bit. :PROCEDURE: ============= -> Put One Of The Caps On The PVC,Seal It, And Let It Dry. -> Fill The Pipe Halfway Full With Your Propellant. -> Hold One End Of The Fuse While Filling The Pipe The Rest Of The Way, With the Propellant. -> The Pipe Should Now Be Full Of Propellant Up To 1/3 Inch From the Top Of The PVC. Fill It The Rest Of The Way With Hot Glue,And Let it Cool. -> Drill A Small Hole In The Remaining Pipe Cap,And Put It On The PVC. -> Make Sure You've Run The Fuse Through The Small Hole. -> Now,Seal The Cap On The Pipe, And Seal The Small Hole Around The Fuse As Well. -> You Now Have A Working Pipe Bomb,How You Use It,Is Up To You!